Referred Journal Papers

2016-2019

Rønneberg, S., Zhuo, Y., Laforte, C., He, J., Zhang, Z., (2019), ” Interlaboratory Study of Ice Adhesion Using Different Techniques” Coatings, vol 9, No. 10, 678. https://doi.org/10.3390/coatings9100678

Rønneberg, S., Laforte, C., Volat, C., He, J., Zhang, Z., (2019), “The effect of Ice Type on Ice Adhesion”, AIP Advances, vol. 9, No. 5, 2019.

Laforte, C. and Tremblay M.-M., (2017), “Comparative evaluation of the anti-Icing protection Time of runway deiciers using infrared thermography”, Cold Regions Science and Technology, vol 138, June 2107, 57-62 pp.

 

2013-2015

Guerin, F., Laforte, C., Farinas, M-I. and Perron, J. (2015), “Analytical Model Based on Experimental Data of Centrifure Ice Adhesion Test with Different Substrates“, Cold Regions Science and Technology, 2015.

Laforte, C., Blackburn C., Laforte, J.-L. and Aubert, R. (2014), “Icephobic Coating Evaluation for Aerospace Applications“, American Institute of Aeronautics and Astronautics, AIAA2014-1327, 2014.

 

2009-2012

Brassard, J.-D., Sarkar, D.K., Perron, J. (2012), “Fluorine Based Superhydrophobic Coatings.” Applied Sciences 2012, 2, 453-464

Brassard, J.-D., Sarkar, D.K., Perron, J. (2011), “Synthesis of Monodisperse Fluorinated Silica Nanoparticles and Their Superhydrophobic Thin Films.”, ACS Appl. Mater. Interfaces 2011, 3, 3583-3588.

Matbou Riahi, M., Marceau, Laforte, C. and Perron, J. (2011), “The Experimental/Numerical Study to Predict Mechanical Behaviour at the Ice/Aluminium Interface“, Cold Regions Science and Technology, Volume 65, Issue 2, 191-202, February 2011.

Laforte, C., Laforte, J.-L. (2010), “Deicing Strains and Stresses of Iced Substrates“, Special Issue on Ice Adhesion of Journal of Adhesion Science and Technology (JAST), Volume 26, 603-620, 2012.

Dotan, A., Dodiuk, H., Laforte, C. and Kenig, S. (2009) “The Relationship between Water Wetting and Ice Adhesion“. Journal of Adhesion Science and Technology, 23, 1907-1915.

Fortin, G. and Perron, J. (2009) “Imperfect First Step in an Ice Physic Adhesion Models to Predict Shear Stress at Shedding“, Special Issue on Ice adhesion of the Journal of Adhesion Science and Technology (JAST), Submit may 2009.

 

2007-2008

Fortin, G., Mayer, C. and Perron, J. (2008) “Icing Wind Tunnel Study of a Wind Turbine Blade Deicing System“, Sea Technology magazine, September 2008.

Hochart, C., Fortin, G., Perron, J. and Ilinca, A. (2007) “Wind Turbine Performance under Icing Conditions“. Wind Energy Journal, 2007.

Mayer, C., Ilinca, A., Fortin, G. and Perron, J. (2007) “Wind Tunnel Study of Electro-Thermal De-icing of Wind Turbine Blades“, International Journal of Offshore and Polar Engineering (ISSN 1053‑5381), Vol. 17, No. 3, pp. 1–7, September 2007.

 

2005-2006

Fortin, G., Laforte, J.L., and Illinca, A., (2006)
“Heat and Mass Transfer during Ice Accretion on Aircraft Wings with an Improved Roughness Model“. International Journal of Thermal Sciences, No. 45, pp. 595-606, 2006.

 

2003-2004

Fortin, G., Ilinca, A., and Laforte, J.L., (2004).
“Modèle d’accrétion de glace sur un objet bidimensionnel fixe appliqué aux pales d’éoliennes“.
Vertigo la revue en sciences de l’environnement, www.vertigo.uqam.ca, Volume 5, No. 1, 2004.

Fortin, G., Ilinca, A., Laforte, J.L. and Brandi,V., (2004).
“New Roughness Computation Method and Geometric Accretion Model for Airfoil Icing”
American Institute of Aeronautics and Astronautics, Journal of Aircraft, Volume 41, No. 1, January-February, 2004.

 

1975-2000

Farzaneh, M. and Laforte, J.L., (1998).
“A Laboratory Simulation of Wet Icing Build-up on H.V. Insulators”.
International Journal of Offshore and Polar Engineering, vol. 8, no. 3, p 167-172.

Laforte, J.L., Allaire, M.A. and Laflamme, J., (1998).
“State-of-the-Art on Power Line De-Icing”.
Atmospheric Research, vol. 46, p 143-158.

Tong, T.V.K., Louchez, P.R. and Laforte, J.L., (1998).
“Introductory Analysis of Draining and Freezing of Deicing Fluids”.
Cold Regions Science and Technology, vol. 25, p 207-214.

Perron, E., Louchez, P.R. and Laforte, J.L., (1996).
“Introductory analysis of boundary Layer development on de/anti-icing fluid”.
The Journal of Aircraft, vol. 33, no. 1, February 1996, p 74-80.

Bouchard, G., Laforte, J.L. and Louchez, P.R., (1995).
“Wind tunnel study on lift reduction on a wing section covered with anti-icing fluid in supercooled precipitation”.
Canadian Aeronautics and Space Journal, vol. 41, no 4, December 1995, p 185-192.

Louchez, P.R., Laforte, J.L., Bouchard, G. and Farzaneh, M., (1995). 
“Laboratory evaluation of aircraft ground de/anti-icing products”.
International Journal of Offshore and Polar Engineering, vol. 5, no. 1, March 1995, p 32-36.

Laforte, J.L., Louchez, P.R. and Bouchard, G., (1993).
“Experimental evaluation of flat Plate boundary layer growth of an anti-icing fluid film”.
Canadian Aeronautics and Space Journal, vol. 39, no 2, June 1993, p 96-104.

Laforte, J.L., Bouchard, G. and Louchez, P.R., (1992).
“Aircraft take-off laboratory simulation for de/anti-icing study”.
Canadian Aeronautics and Space Journal, vol. 38, no. 4, Dec. 1992, p 183-193.

Laforte, J.L., Louchez, P.R. and Bouchard, G., (1992).
“Cold and humid environment simulation for de/anti-icing fluids evaluation”.
Cold Regions Science Technology, vol. 20, 1992, p 195-206.